Winch MastersGet a quote

Towing & Recovery Basics: Gear, Safety and Cover

Towing & recovery basics cover how to move a disabled vehicle, pull a stuck one free and carry loads safely. This guide splits the topic by situation.

Each section gives you six practical points to check before you pull, strap or call for help.

Key points

  • Towing moves a vehicle along a road, while recovery frees one that is stuck, so each job needs different gear and a different plan.
  • Check the weight and rating of every strap, hitch and tie-down against the vehicle before any load goes on it.
  • Rules on towing, licences and roadside cover differ by state, so check with your state road authority or transport regulator.
  • Stop and call a professional when a job involves a steep slope, water, a damaged chassis or a vehicle you cannot safely hold.
TermMeaningWhy it matters
TowingPulling a vehicle or trailer along a road using a hitch, bar or tow truck.The towing vehicle must be rated for the load.
RecoveryFreeing a vehicle from mud, sand, a ditch or a similar situation.It puts higher shock loads on gear than towing does.
Recovery strapA stretchy strap built to recover a vehicle from a tight spot such as mud or rain-soaked ground.The stretch absorbs shock and eases the pull.
Tow strapA low-stretch strap, usually polyester webbing, for pulling on firm ground.Polyester stretches less than nylon, so it suits steady towing, not snatch recovery.
Break strengthThe load at which a strap, chain or tie-down fails.Choose tie-downs with a break strength well above the vehicle weight, about double as a rule of thumb.
Tie-downA strap or chain that secures a vehicle or load to a trailer or tray.A weak or worn tie-down lets the load shift in transit.

Towing & recovery basics for breakdowns on the road

A breakdown is where most people first meet towing. What you do in the first few minutes matters more than the gear you own.

  1. Pull as far off the carriageway as you safely can, switch on hazard lights, and avoid stopping on a blind bend or crest where traffic cannot see you.
  2. Get everyone out on the side away from traffic, and wait well clear of the vehicle, ideally behind a barrier or beyond the verge.
  3. If you smell gas or fuel, leave at once, avoid switches and flames, and call the emergency number from a safe distance.
  4. If you see smoke, smell burning or notice exposed wiring, stay away from the vehicle and call a qualified person or the emergency number.
  5. Note your exact location from road signs, markers or a map, so a tow operator can find you without searching the road.
  6. Do not attempt to push or tow a vehicle with a failed brake booster or steering lock, as it becomes very hard to control.

Towing & recovery basics for choosing a tow vehicle

The vehicle doing the pulling sets the limit for the whole job. Our guide to choosing a towing vehicle goes deeper on matching vehicle to load.

  1. Read the towing capacity in the owner's manual or on the compliance plate, and treat that figure as a ceiling, not a target.
  2. Compare the towball download figure with what your trailer or caravan puts on the hitch, because overloading the ball upsets steering and braking.
  3. Check that the tow bar, hitch receiver and wiring plug are rated for the load and fitted to the manufacturer's instructions.
  4. Choose a vehicle heavier than the thing it tows where possible, since a heavier tug holds the load back better on downhill runs.
  5. Confirm the brakes on the trailer or towed vehicle work and are connected before you leave, and test the controller on a flat, empty stretch.
  6. Have tow bar electrical connections installed or repaired by a qualified auto electrician or fitter, and do not splice into vehicle wiring yourself.

Towing & recovery basics for straps, chains and gear

Gear fails when it is the wrong type, worn or used beyond its rating. Match each item to the job and inspect it before every use.

  1. Use a stretchy recovery strap for pulling a vehicle out of mud or rain-soaked ground, since the stretch absorbs shock and reduces strain on both vehicles.
  2. Use a polyester tow strap for steady pulls on firm ground, because polyester stretches less than nylon and gives more controlled movement.
  3. Attach straps only to rated recovery points or a rated tow hitch, and avoid attaching to a tow ball, bumper bar trim or suspension part.
  4. Reject any strap with cuts, frays, melted patches or stitching damage, and replace it rather than repairing it with knots.
  5. Use rated shackles with the pin fully seated and backed off a quarter turn, and keep them clear of the ground where they can snag.
  6. Store gear clean and dry, out of sunlight and away from fuel or oil, because contamination and UV weaken webbing over time.

Towing & recovery basics for bogged vehicles

A bogged vehicle is easy to make worse. A calm, slow approach protects the vehicle, the gear and the people around it.

  1. Stop spinning the wheels as soon as the vehicle stops moving, because digging in deeper makes the recovery harder and can damage the driveline.
  2. Walk around and look at how deep each wheel sits, where the vehicle is grounded, and which direction offers firm ground.
  3. Clear mud or sand from in front of the tyres and the underbody, and place traction boards or solid timber where the tyres will roll.
  4. Keep every bystander well to the side of the strap line and out of the area between the two vehicles during the pull.
  5. Use a recovery strap for the pull, take up slack gently, and let the other vehicle ease forward instead of jerking against the load.
  6. Stop and call a professional if the vehicle sits in water, on a slope, near a drop, or has chassis damage you can see.

Towing & recovery basics for motorbikes

Bikes are light but awkward to move. They are easy to damage with the wrong strap points.

Costs and cover for riders vary, so see our guide on motorcycle CTP and check requirements with your state regulator. Low-risk riders on mid-range bikes typically pay between $450 and $1,100 per year for comprehensive cover.

  1. Use a ramp or a rated bike trailer with a wheel chock, and load the bike with a helper holding it upright.
  2. Secure the front wheel first with two tie-downs pulling forward and outward, compressing the forks only part way so they stay under tension.
  3. Attach straps to solid frame or triple-tree points, using soft loops where needed to avoid scratching or crushing handlebars, levers and cables.
  4. Strap the rear separately so the bike cannot swing sideways, and recheck tension after the first few kilometres of travel.
  5. Leave the bike in gear with the fuel tap off where fitted, and keep the side stand up and stowed during transport.
  6. Ask a tow operator who carries bikes regularly if the machine is low, heavily modified, or has a damaged frame or wheel.

Towing & recovery basics for roadside assistance cover

Roadside cover decides who comes, how far they tow and whether you pay at the kerb. Compare terms carefully.

Read how local options work, such as roadside assistance in Tasmania.

  1. Read how far your plan will tow a vehicle, because limits vary and any extra distance is usually charged separately to you.
  2. Check how many call-outs per year your plan includes, and what happens to the cost once you pass that limit.
  3. Look for waiting periods after purchase, since some plans restrict or add fees to call-outs booked shortly after you join.
  4. Confirm whether the plan covers the person or the vehicle, so you know if it applies when you drive a friend's car.
  5. Check whether caravans, trailers and motorbikes are included or need an extra option added to the membership.
  6. Ask for a written quote when you pay a tow operator directly, and check it lists the call-out, distance and any after-hours costs.

Towing & recovery basics for tie-downs and load restraint

A good rule of thumb is for the tie-down's break strength to be about double the vehicle weight. Use it as the starting point for every load.

  1. Add up the weight of the vehicle or load, then choose tie-downs whose combined break strength is about double that weight.
  2. Run each strap at an angle that pulls the load down and inward, so it cannot lift or slide on the deck.
  3. Secure all four corners of a car on a trailer or tray, using axle straps or wheel nets rather than body panels.
  4. Pad every strap edge that touches a sharp corner, since a cut edge reduces break strength well below the printed rating.
  5. Fit ratchets so the loose tail is tied off, and keep the release handle clear of anything that could snag it.
  6. Stop and re-tighten after the first few minutes of driving, then recheck at each fuel stop or break in the trip.

Towing & recovery basics: gear compared by job

This table shows which common item suits which job, so you pick the right piece before you start.

ItemBest forWatch out for
Recovery strapMud, wet ground and tight spotsNot suited to a long road tow
Polyester tow strapSteady pulls on firm groundLow stretch makes snatch pulls harsh
ChainFixed, controlled pulls with rated pointsNo stretch, so it can shock-load the vehicle
Rated shackleJoining straps to recovery pointsPin must be seated and not overtightened
Ratchet tie-downSecuring a vehicle on a trailerCheck rating against vehicle weight
Traction boardsGetting tyres moving on sand or mudMust sit firmly under the tread

Best practices for towing & recovery basics

Frequently asked questions

What is the difference between towing and recovery?

Towing moves a vehicle or trailer along a road using a hitch, bar or tow truck. Recovery frees a vehicle that is stuck in mud, sand or a ditch, and it usually puts bigger shock loads on the gear.

Can I use a recovery strap to tow a car down the road?

A recovery strap is designed to free a vehicle from a tight spot like mud, not for long road tows. Its stretch makes steering and braking unpredictable, so use a low-stretch tow strap or a tow truck instead.

What is the difference between nylon and polyester straps?

Polyester webbing stretches less than nylon, which gives steadier pulling on firm ground. Nylon stretches more, so it absorbs shock better and suits recovery from mud, but each strap should be used for its intended job.

How strong should my tie-downs be?

A good rule of thumb is for the tie-down's break strength to be about double the vehicle weight. Check the rating printed on each strap, and replace any strap that is worn, cut or unmarked.

Do towing rules differ between states?

Yes, towing limits, licence requirements and equipment rules can differ between Australian states and territories. Check with your state road authority or transport regulator before towing a heavy trailer, caravan or another vehicle.

When should I call a professional instead of doing it myself?

Call a professional if the vehicle is in water, on a slope, near a drop, leaking fuel or visibly damaged underneath. Also call one when you lack rated recovery points, suitable gear or a second driver to help.

Next step for towing & recovery basics

If you have a vehicle that needs moving or freeing, or you are unsure what gear suits the job, we can send a licensed tow operator to look at it.

Tell us what happened, where the vehicle is and what it weighs, and we will go from there.

Get a quote

Request a quote

Tell us what you need and we will get back to you.